NTP LED Time Display Unit

NTP LED Time Display Unit

Overview

NTP Time Display is a free running clock which is synchronized through network connection using NTP protocol. It can be synchronized with NTP based network time server (Navic or GPS) to maintain accurate time. It is suitable for mission critical operation applications where UT/UTC and time zone (offset) can be monitored. (UT/IST/NTP/CDT time can be read and displayed as per user requirement)

System Configuration

  • Display is configured as a front box with LED display and a back box with motherboard to reduce the weight of the Unit.
  • The controls and connectors are mounted in the side panel of the back box
  • Display comes with Z-angles that support both ceiling and wall mount or a stand for desktop/table top version.

System Specifications

  • Inputs

1. Network Input

  • I. For reading, synchronization and configuration of time information.

  • II. Connector: Standard 100/1000 Base-T Ethernet, RJ-45 connector.

  • III. Protocol: Supports – NTP, SNMP.

2. USB connector

  • I. For System configuration and control.

  • Controls

1. Unit will have a provision for assigning the IP address, Subnet mask and offset time through Microsoft Windows based operating system via LAN or USB.

  • Front Panel Display

1. Display for displaying Universal time information (format as per user requirement)

2. LED Display with digits and format as per user requirement (9digits – DDD:HH:MM:SS /6digits – HH:MM:SS separated by colon).

3. DDD represents days(366 considering leap year), HH represents the hours in 24 hour format, MM represents the minutes and SS represents the seconds.

4. Digit size/height varies as per user requirement (2inch/4inch/8 inches)

5.Digit color (RED/AMBER/BLUE/GREEN) as per user requirement.

6. Any kind of other customizations can be done according to user requirements.

  • Other Specifications

1. Unit can run for internal RTC with dot indication at the right end of display in case of synchronization loss of NTP time from NTP server.

2. Display configuration will be saved to non-volatile memory to survive any power failure.

3. Units client software will be compatible for Windows 8/10/12 or any latest operating system (OS) for configuring IP address, offset time etc.

  • Accessories

1. Power cord, USB interface cable, User manual, wall mounting clamps and other needed software / hardware will be provided along with the using as per users requirement.